ACCULASE-GPA™
AccuLase-GPA™ is the only tunable diode laser (TDL) analyzer that measures H2S, CO2, and H2O using 1 Herriot Cell.
AccuLase-GPA™ was designed for specific natural gas and refinery applications. AccuLase is backed by 40 years of experience in the natural gas industry.
AccuLase-GPA™ uses a proprietary measurement cell that detects H2S down to 0.15 ppm, rivaling the capabilities of lead-acetate tape technology. AccuLase-GPA™ is specific to H2S without methane, CO2, or benzene interferences. Since AccuLase-GPA™ does not require a scrubber system, the response time is 30 seconds. AccuLase-GPA™ can measure up to 4 streams.
ACCUCHROME™ GC
AccuChrome is designed for critical monitoring in the harshest environments.
Whether you’re performing Btu and constituent analysis of natural gas for custody transfer, process optimization during natural gas fractionation, or 40 CFR 60 Subpart JA flare-gas emissions monitoring for regulatory compliance – you need precise, real-time measurements you can count on.
PROTECH903™
Galvanic’s ProTech903TM Gas Analyzers deliver fast, extremely sensitive and accurate analysis of H2S and total sulfur, arsine, phosphine, or phosgene, depending on which analyzer you choose.
Low detection limits and outperform all other analytical methods in the critical application range of 0 to 15 ppmv. Easy remote-access capability and fast, accurate analyte-specific measurement – you have all you need to monitor critical parameter levels to improve product quality and lower costs, ensure pipeline, equipment, and public safety, or meet regulatory and contractual compliance targets.
BRIMSTONE™
The Brimstone is a unique tail & pit gas analyzer that monitors H2S, SO2, CS2 and COS and is capable of direct coupling to the process. Direct coupling provides the Brimstone with the ability to control sulfur vapor removal more efficiently. Galvanic’s proprietary probe design eliminates plugging problems associated with heated transfer lines. In addition, the Brimstone uses Chemometrics to measure all four key components; H2S, SO2, CS2 and COS simultaneously. This is a superior method because it measures absorption at 256 points versus the standard single point analysis.
SULFURCHROME™
SulfurChrome GC measures speciated sulfur in natural gas. Do you need to monitor odorant levels in hydrocarbons? That requires high-sensitivity detection and measurement of the individual sulfur components. Some natural gas pipeline custody-transfer applications also require detailed reporting of sulfur and its various components. Galvanic’s SulfurChrome online gas chromatograph makes it easy, enabling simultaneous, real-time measurement of all sulfur compounds down to the 5 ppb level.